Two-brothers-racing 2011 Suzuki GSX-R600 / 750 Bedienungsanleitung PDF herunterladen

1. Make sure the bike is completely cool before

starting the installation. Make sure the bike is

secure on a centerstand or ideally a service lift.

2. Remove OEM mufﬂer heatshield.

3. Remove OEM mufﬂer assembly.

4. Attach mufﬂer to TBR slip system using the supplied

X-ring, 6x20mm socket head cap screws and lock

washers that are provided, leave loose for now.

Slide rubber lined mufﬂer clamp and barrel clamp

on and install to bike.

5. Loosely attach mufﬂer to bike using the OEM bolt

and nut and install mufﬂer clamp to inside of

passenger footpeg.

6. Check for clearance and alignment, then tighten all

the bolts in this order: X-ring bolts, mufﬂer mount,

and ﬁnally barrel clamp.

7. Before you run the bike, clean off all ﬁngerprints

and dirt, as any oily residue will etch the metal and

become somewhat permanent when the system

gets hot. Run the bike and enjoy. It is normal for

some white smoke to appear the ﬁrst time you start

the bike. This is packing/manufacturing oil from

inside the pipe burning off. Check for gaps or leaks.

If you ﬁnd a leak, a little high temperature silicon

sealant should ﬁx it. After 50 to 100 miles, recheck

all fasteners for tightness.

V.A.L.E.

V A R I A B L E A X I S L O C K I N G E X H A U S T

Parts List

IMPORTANT - PLEASE READ CAREFULLY

We recommend that this performance part be installed by a qualied

motorcycle technician. If you have any doubts as to your ability to install this

performance part, please consult with your local motorcycle dealer. Read all

instructions rst before starting installation. Make sure the motorcycle and

exhaust system are completely cool before starting the installation. Also,

make sure the bike is secure on a centerstand or ideally a service lift during

installation. Be sure to save all stock components for possible use later.

Installation Instructions

Qty. Description Part Number

1 M-2 Mufﬂer Canister Varies

1 Canister Clamp with Rubber Liner Varies

1 Header Kit 005-30404S

1 HARDWARE KIT 005-304-3

2 X-Ring (half) 005-7-2-2

1 66mm Barrel Clamp 005-27-61MSH

4 6x20mm Socket Head Cap Screws 005-SH620

4 6mm Split Lock Washer 005-WL6

1 T20 Torx Hex Key 005-9-15820

1 5mm Ball End Hex Key 005-9-18610

1 TBR Sticker Kit 015-10212

2011 Suzuki

GSX-R600 / 750

V.A.L.E.™ Slip-on Exhaust System with M-2 Exhaust Canister

Part # 005-3040406V, 005-3040407V, 005-3040408V

Warranty Information

Two Brothers Racing products are intended for closed course competition purposes only, and therefore are

sold “as is” without warranty. Two Brothers Racing specifically disclaims any warranties of merchantability

or fitness for a particular purpose and disclaims all responsibility for consequential and incidental damages

or any other losses arising from the use of these products or parts. Not tested for use with OEM or

aftermarket accessories.

1 2

V.A.L.E 1
GSX-R600 / 750 2

Inhaltsverzeichnis

Seite 1 - V.A.L.E

1. Make sure the bike is completely cool before starting the installation. Make sure the bike is secure on a centerstand or ideally a service lift. 2

Seite 2 - GSX-R600 / 750

Qty. Description Part Number1 M-2 Mufﬂer Canister Varies1 Canister Clamp with Rubber Liner Varies1 Header Kit 005-30404S1 HARDWARE KIT 005-3

Kommentare zu diesen Handbüchern

Keine Kommentare

Two-brothers-racing 2011 Suzuki GSX-R600 / 750 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Two-brothers-racing 2011 Suzuki GSX-R600 / 750 herunter. Two Brothers Racing 2011 Suzuki GSX-R600 / 750 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Two-brothers-racing 2011 Suzuki GSX-R600 / 750