Two-brothers-racing Yamaha Grizzly 700 Bedienungsanleitung PDF herunterladen

V.A.L.E.

VARIABLE AXIS LOCKING EXHAUST

Installation Instructions

2007 Yamaha

GRIZZLY 700

V.A.L.E.™ Slip-On Exhaust System with M-7 Aluminum Canister

Part # 005-1790406V

1. Make sure the quad is completely cool before starting

the installation. Make sure the quad is secure on a level

surface and the wheels are chocked to prevent the quad

from rolling.

2. For easier installation, remove the body parts listed:

- Seat - Left foot pan assembly

- Left side body panel

3. Remove the mid-pipe joint cover to expose the springs

connecting the head pipe with the mid-pipe. Remove

the spring. The OEM gasket will be re-used with the TBR

exhaust system.

4. Remove the mufer mount bolt and remove the mufer

assembly.

5. Remove the OEM heat shield from the mufer assembly

and attach it to the bracket located on the TBR mufer

using the original hardware (We applied a small amount

of grease onto each bolt to help it stick in place while we

aligned the heat shield to the TBR brackets).

6. Use the 4 (four) 6 x 14mm socket head cap screws and

split lock washers to loosely attach the X-Lite™ ring to

mufer inlet using the split-lock washers provided. (See

V.A.L.E.™ Assembly Detail below) Leave loose for now.

7. Make sure gasket is either in the TBR slip-on tube or

on the OEM headpipe and slip the mufer assembly

into place (joining the TBR slip-on and OEM headpipe).

Attach the mufer with the 8 x 25mm Flange Bolt

provided.

8. Attach spring at mufer joint.

... Continued on Page 2

Mufer Inlet

X-Lite™ Ring

Slip Tube

V.A.L.E.™ Assembly Detail

IMPORTANT - PLEASE READ CAREFULLY

Warranty

Two Brothers Racing products are intended for closed course competition purposes only, and therefore are sold “as is”

without warranty. Two Brothers Racing specifically disclaims any warranties of merchantability or fitness for a particular

purpose and disclaims all responsibility for consequential and incidental damages or any other losses arising from the use

of these products or parts.

We recommend that this performance part be installed by a qualied

motorcycle technician. If you have any doubts as to your ability to install this

performance part, please consult with your local motorcycle dealer. Read all

instructions rst before starting installation. Make sure the motorcycle and

exhaust system are completely cool before starting the installation. Be sure

to save all stock components for possible use later.

**This product has not been tested with all available accessories and some

items may cause excessive heat. Excessive heat may cause damage to your

vehicle. Two Brothers Racing will not be responsible for damaged parts.

1 2

V.A.L.E 1

Inhaltsverzeichnis

Seite 1 - V.A.L.E

V.A.L.E.VARIABLE AXIS LOCKING EXHAUSTTMInstallation Instructions2007 YamahaGRIZZLY 700V.A.L.E.™ Slip-On Exhaust System with M-7 Aluminum CanisterPart

Seite 2

V.A.L.E.VARIABLE AXIS LOCKING EXHAUSTTM2007 YamahaGRIZZLY 700V.A.L.E.™ Slip-On Exhaust System with M-7 Aluminum CanisterPart # 005-1790406VInstallatio

Weitere Dokumente für Für das Auto Two-brothers-racing Yamaha Grizzly 700

Um das Dokument anzuzeigen Two-brothers-racing Yamaha Grizzly 700 Bedienungsanleitung

Two-brothers-racing Yamaha Grizzly 700 Bedienungsanleitung (5 Seiten)

Two-brothers-racing Yamaha Grizzly 700 Bedienungsanleitung (3 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Two-brothers-racing Yamaha Grizzly 700 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Two-brothers-racing Yamaha Grizzly 700 herunter. Two Brothers Racing Yamaha Grizzly 700 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Für das Auto Two-brothers-racing Yamaha Grizzly 700

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Two-brothers-racing Yamaha Grizzly 700