Two-brothers-racing Harley Davidson FL Bedienungsanleitung
Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Two-brothers-racing Harley Davidson FL herunter. Two Brothers Racing Harley Davidson FL User Manual Benutzerhandbuch
- Seite / 1
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
IMPORTANT - PLEASE READ CAREFULLY
Warranty
Two Brothers Racing products are intended for closed course competition purposes only, and therefore are sold “as is”
without warranty. Two Brothers Racing specifically disclaims any warranties of merchantability or fitness for a particular
purpose and disclaims all responsibility for consequential and incidental damages or any other losses arising from the use
of these products or parts.
We recommend that this performance part be installed by a qualied
motorcycle technician. If you have any doubts as to your ability to install this
performance part, please consult with your local motorcycle dealer. Read all
instructions rst before starting installation. Make sure the motorcycle and
exhaust system are completely cool before starting the installation. Also,
make sure the bike is secure on a centerstand or ideally a service lift during
installation. Be sure to save all stock components for possible use later.
Installation Instructions
1. Remove saddle bags.
2. Loosen OEM joint clamp.
3. Remove two rear mount bolts. These will be used with the
TBR mufers.
4. Remove OEM mufer.
5. Remove OEM joint clamp and install onto TBR inlet. Install
TBR slip-on onto OEM mid-pipe.
6. Install two rear mount bolts and tighten snug.
7. Tighten joint clamp.
Care & Cleaning
Care & Cleaning
Keep system free of dirt and moisture. Store in a cool, dry place. Make sure vehicle is
completely cool before maintenance.
Stainless Header System: Polished stainless steel pipes will turn a light golden hue
after a few heat cycles, this is a normal characteristic of high quality stainless steel.
Clean using a mild water based spray cleaner. Always apply cleaner or polish with a
soft, clean cloth.
Titanium Header System: Polished titanium pipes will experience color shift ranging
from deep blue/purple through amber after a few heat cycles. This is a normal
characteristic of high quality titanium. Clean using a mild water based spray cleaner.
Always apply cleaner or polish with a soft, clean cloth.
Polished Aluminum Canisters: Use an aluminum or mag wheel polish to restore the
bright nish to factory spec.
Brushed Aluminum Canisters: Clean using a mild water based spray cleaner. Always
apply cleaner or polish with a soft, clean cloth.
Carbon Fiber Canisters: Clean using a mild water based spray cleaner. Always apply
cleaner or polish with a soft, clean cloth. Always make sure the berglass packing inside
is in good condition and not burned out, as exhaust heat inside an empty canister will
deteriorate the carbon ber sleeve.
TBR sells repack kits (Road - #005-10038, Offroad - #005-10038MX) that include
everything you need to easily do it yourself.
Titanium Mufers: For cleaning use a mild water based spray cleaner. Always apply
cleaner or polish with a soft, clean cloth. Always make sure the berglass packing inside
is in good condition and not burned out, as exhaust heat inside an empty canister will
deteriorate the carbon ber sleeve.
TBR sells repack kits (Road - #005-10038, Offroad - #005-10038MX) that include
everything you need to easily do it yourself.
Repack all road canisters every 3,000 miles. Part #005-10038
Repack all offroad canisters after every 10 hours of use. Part #005-10038MX
NEVER dyno test your bike with carbon ber or titanium canisters installed - the
intense heat and lack of cooling air can quickly burn through the canister material. Two
Brothers Racing does not provide a warranty for burned canisters.
Harley Davidson
FL Touring
Slip-On Exhaust System
Part # 005-3870499D
8. Repeat these steps for other side.
9. Double check all your work.
10. Re-install saddle bags.
11. Before you run the bike, clean off all ngerprints and
dirt, as any oily residue will etch the metal and become
somewhat permanent when the system gets hot. Run
the bike and enjoy. It is normal for some white smoke to
appear the rst time you start the bike. This is packing/
manufacturing oil from inside the pipe burning off. Check
for gaps or leaks. If you nd a leak, a little high temperature
silicon sealant should x it. After 50 to 100 miles, recheck
all fasteners for tightness.
1
Inhaltsverzeichnis
Seite 1 - FL Touring
IMPORTANT - PLEASE READ CAREFULLYWarrantyTwo Brothers Racing products are intended for closed course competition purposes only, and therefore are sold
Weitere Dokumente für Für das Auto Two-brothers-racing Harley Davidson FL
Verwandte Produkte und Handbücher für Für das Auto Two-brothers-racing Harley Davidson FL
(2 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.987 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern