Two-brothers-racing BMW R1200GS Bedienungsanleitung PDF herunterladen

V.A.L.E.

VARIABLE AXIS LOCKING EXHAUST

Installation Instructions

1. Make sure the bike is completely cool before starting

the installation. Make sure the bike is secure on a

centerstand or ideally a service lift.

2. Remove OEM mufer assembly by removing mufer

mount bolt and removing mufer tube joint clamp.

3. Install supplied mufer mounting bracket using the

8x20mm bolt that is provided.

4. Loosely attach TBR slip-tube to TBR muffler using

the supplied two-part X-Ring and 6x20mm bolts

with lock washers. use supplied lock-tight.

5. Install TBR muffler assembly to motorcycle with the

rubber lined muffler clamp on muffler and barrel

clamp on slip-tube.

6. Attach muffler clamp to the previously installed

bracket using the supplied 8x16mm bolt and flange

nut. You can use the OEM washer for a different look.

7. Align muffler and tighten the muffler clamp bolt.

8. Check alignment and tighten X-Ring bolts then

barrel clamp.

9. Before you run the bike, clean off all fingerprints

and dirt, as any oily residue will etch the metal and

become somewhat permanent when the system

gets hot. Also, remove any protective plastic from

the name badges on the muffler canister(s) or the

muffler clamp(s). Run the bike and enjoy. It is normal

for some white smoke to appear the first time you

start the bike. This is packing/manufacturing oil from

inside the pipe burning off. After 50 to 100 miles,

recheck all fasteners for tightness.

2010-11 BMW

R1200GS / GSA

Slip-on Exhaust System

Part# 005-29804

IMPORTANT - PLEASE READ CAREFULLY

Warranty

Two Brothers Racing products are intended for closed course competition purposes only, and therefore are sold “as is”

without warranty. Two Brothers Racing specifically disclaims any warranties of merchantability or fitness for a particular

purpose and disclaims all responsibility for consequential and incidental damages or any other losses arising from the use

of these products or parts.

We recommend that this performance part be installed by a qualied motorcycle

technician. If you have any doubts as to your ability to install this performance

part, please consult with your local motorcycle dealer. Read all instructions rst

before starting installation. Make sure the motorcycle and exhaust system are

completely cool before starting the installation. Also, make sure the bike is secure

on a centerstand or ideally a service lift during installation. Be sure to save all stock

components for possible use later.

**This product has not been tested with all available accessories and some

items may cause excessive heat. Excessive heat may cause damage to your

vehicle. Two Brothers Racing will not be responsible for damaged parts.

1 2

V.A.L.E 1

Inhaltsverzeichnis

Seite 1 - V.A.L.E

V.A.L.E.VARIABLE AXIS LOCKING EXHAUSTTMInstallation Instructions1. Make sure the bike is completely cool before starting the installation. Make sure

Seite 2

Qty. Description Part Number1 Exhaust Canister 005-808ML1 Mufer Canister Clamp 005-5C1 Stainless Steel Slip Tube 005-29804S1 HARDWARE KIT

Weitere Dokumente für Für das Auto Two-brothers-racing BMW R1200GS

Um das Dokument anzuzeigen Two-brothers-racing BMW R1200GS Bedienungsanleitung

Two-brothers-racing BMW R1200GS Bedienungsanleitung (3 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Two-brothers-racing BMW R1200GS Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Two-brothers-racing BMW R1200GS herunter. Two Brothers Racing BMW R1200GS User Manual Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Für das Auto Two-brothers-racing BMW R1200GS

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Two-brothers-racing BMW R1200GS