Two-brothers-racing M2R MX Bedienungsanleitung PDF herunterladen

V.A.L.E.

V A R I A B L E A X I S L O C K I N G E X H A U S T

Parts List

IMPORTANT - PLEASE READ CAREFULLY

Warranty

Two Brothers Racing products are intended for closed course competition purposes only, and therefore are sold “as is”

without warranty. Two Brothers Racing specifically disclaims any warranties of merchantability or fitness for a particular

purpose and disclaims all responsibility for consequential and incidental damages or any other losses arising from the use

of these products or parts.

We recommend that this performance part be installed by a qualied

motorcycle technician. If you have any doubts as to your ability to install this

performance part, please consult with your local motorcycle dealer. Read all

instructions rst before starting installation. Make sure the motorcycle and

exhaust system are completely cool before starting the installation. Also,

make sure the bike is secure on a centerstand or ideally a service lift during

installation. Be sure to save all stock components for possible use later.

Installation Instructions

1. Make sure the bike is completely cool before starting

the re-pack. Make sure the bike is secure on a stand. This

proceedure may be performed on or off the bike.

2. Remove endcap bolts, endcap, washer, p-tip and spark

arrestor (if applicable).

3. Loosen M2R retaining nut with the core nut tool that came

with your original exhaust system, uses a 27mm socket.

4. Remove outlet, may require use of a rubber mallot if

tight, hitting the edge of the outlet in the direction of

exhaust ﬂow. You may also use the M2R outlet removal

tool (purchased seperately part # 005-99-T175).

2010 M2R MX

REPACK KIT

High Temp Fiber Kit

Part # 005-99-R12, 005-99-R14, 005-99-R15

Qty. Description Part Number

1 Screen Rope Varies

1 Fiber Packing Varies

2 Viton O-Ring 005-7-7

1 M2R MX Namebadge 005-99-N2010MX

6 T20 Torx Screws - Black 005-TH510-B

1 T20 Torx Screw Hex Key 005-9-15820

1 Anti-Sieze Tape

1 Cotton Rag 005-9-R

1 TBR Sticker Kit 015-10212

5. Remove old packing material, may be easier with

pliers. Install new packing material, the cutout section

of the packing is the top, so that it slides under the

hanger bracket.

6. Install O-ring on outlet, make sure that it goes in the

upper groove, closest to endcap.

7. Use anti-seize tape on core threads, wrap the tape to the

left or clock-wise direction.

8. Install Outlet, you may use a soft mallot with the provided

rag so that you do not damage the outlet.

1 2

V.A.L.E 1

Inhaltsverzeichnis

Seite 1 - V.A.L.E

V.A.L.E.V A R I A B L E A X I S L O C K I N G E X H A U S TTMParts ListIMPORTANT - PLEASE READ CAREFULLYWarrantyTwo Brothers Racing products are

Seite 2

11. Align P-tip so that the slant is facing up. Re-install endcap and torx bolts, tighten in a cross pattern.12. If your sticker badge is beaten up,

Kommentare zu diesen Handbüchern

Keine Kommentare

Two-brothers-racing M2R MX Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Two-brothers-racing M2R MX herunter. Two Brothers Racing M2R MX User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Two-brothers-racing M2R MX