Two-brothers-racing Suzuki DL650V-Strom Bedienungsanleitung PDF herunterladen

1. Make sure the bike is completely cool before

starting the installation. Make sure the bike is

secure on a centerstand or ideally a service lift.

2. Remove lower exhaust mounting bolt.

3. Remove front header pipe.

4. Remove rear pipe assemblyt.

5. Install TBR mid-pipe using OEM mounting

hardware and supplied 57mm barrel clamps.

6. Re-install OEM front header pipe.

7. Attach mufer to TBR slip system using the

supplied X-ring, 6x20mm socket head cap screws

and lock washers that are provided, leave loose for

now. Slide rubber lined mufer clamp with supplied

bolt and spacer. Slide barrel clamp on end of tube.

8. Loosely attach mufer to bike using the OEM

hardware on slip-tube mount and install mufer

clamp using the supplied bolt and spacer.

IMPORTANT - PLEASE READ CAREFULLY

We recommend that this performance part be installed by a qualied

motorcycle technician. If you have any doubts as to your ability to install this

performance part, please consult with your local motorcycle dealer. Read all

instructions rst before starting installation. Make sure the motorcycle and

exhaust system are completely cool before starting the installation. Also,

make sure the bike is secure on a centerstand or ideally a service lift during

installation. Be sure to save all stock components for possible use later.

Installation Instructions

Warranty Information

Two Brothers Racing products are intended for closed course competition purposes only, and therefore

are sold “as is” without warranty. Two Brothers Racing specifically disclaims any warranties of

merchantability or fitness for a particular purpose and disclaims all responsibility for consequential and

incidental damages or any other losses arising from the use of these products or parts. Not tested for use

Suzuki

DL650 V-STROM

V.A.L.E.™ Full Exhaust System with M-2 Exhaust Canister

Part # 005-3140106V, 005-3140107V, 005-3140108V

1 2

DL650 V-STROM 1

Inhaltsverzeichnis

Seite 1 - DL650 V-STROM

1. Make sure the bike is completely cool before starting the installation. Make sure the bike is secure on a centerstand or ideally a service lift. 2

Seite 2

(LEFT SIDE OF BIKE) Header bolt10. Before you run the bike, clean off all ngerprints and dirt, as any oily residue will etch the metal and become s

Kommentare zu diesen Handbüchern

Keine Kommentare

Two-brothers-racing Suzuki DL650V-Strom Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Two-brothers-racing Suzuki DL650V-Strom herunter. Two Brothers Racing Suzuki DL650V-Strom User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Two-brothers-racing Suzuki DL650V-Strom