Two-brothers-racing Yamaha TTR110 Bedienungsanleitung PDF herunterladen

IMPORTANT - PLEASE READ CAREFULLY

Warranty

Two Brothers Racing products are intended for closed course competition purposes only, and therefore are sold “as is”

without warranty. Two Brothers Racing specifically disclaims any warranties of merchantability or fitness for a particular

purpose and disclaims all responsibility for consequential and incidental damages or any other losses arising from the use

of these products or parts.

We recommend that this performance part be installed by a qualied

motorcycle technician. If you have any doubts as to your ability to install this

performance part, please consult with your local motorcycle dealer. Read all

instructions rst before starting installation. Make sure the motorcycle and

exhaust system are completely cool before starting the installation. Also,

make sure the bike is secure on a centerstand or ideally a service lift during

installation. Be sure to save all stock components for possible use later.

Make sure the bike is completely cool before starting the

installation. Make sure the bike is secure on the sidestand

or ideally a rear service stand.

Remove the right, rear number plate panel.

Remove the stock exhaust system.

Install the TBR header.

Place a bead of the hi-temp sealant on the outside edge

of the header that goes into the canister. Slide the TBR

canister onto the end of the header. Wipe off the excess

sealant that will squeeze out.

Use the OEM bolt to secure muffler assembly to subframe.

Make sure everything is aligned and tighten all hardware.

Before you run the bike, clean off all fingerprints and

dirt, as any oily residue will etch the metal and become

somewhat permanent when the system gets hot. Run

the bike and enjoy. It is normal for some white smoke to

appear the first time you start the bike. This is packing/

manufacturing oil from inside the pipe burning off.

Check for gaps or leaks. If you find a leak, a little high

temperature silicon sealant should fix it. After your first ride,

recheck all fasteners for tightness.

Yamaha

TT-R110

Complete Exhaust System with M-6 Canister

Part # 005-1970104M

Qty. Description Part Number

1 Header 005-19701H

1 Mufﬂer 005-197204M

1 Spark Arrestor (installed) 005-107-S

1 Spark Arrestor Spacer (installed) 005-107-S1

1 HARDWARE KIT 005-197-3

1 Permatex Ultra Black Gasket Maker 031-P22072

2 Two Brothers Racing Stickers 015-10208-A

Installation Instructions

Parts List

Parts List 1

Inhaltsverzeichnis

Seite 1 - Parts List

IMPORTANT - PLEASE READ CAREFULLYWarrantyTwo Brothers Racing products are intended for closed course competition purposes only, and therefore are sold

Kommentare zu diesen Handbüchern

Keine Kommentare

Two-brothers-racing Yamaha TTR110 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Two-brothers-racing Yamaha TTR110 herunter. Two Brothers Racing Yamaha TTR110 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Two-brothers-racing Yamaha TTR110