Two-brothers-racing Kawasaki ZX-6R FE Bedienungsanleitung PDF herunterladen

IMPORTANT - PLEASE READ CAREFULLY

We recommend that this performance part be installed by a qualied motorcycle

technician. If you have any doubts as to your ability to install this performance

part, please consult with your local motorcycle dealer. Read all instructions rst

before starting installation. Make sure the motorcycle and exhaust system are

completely cool before starting the installation. Also, make sure the bike is secure

on a centerstand or ideally a service lift during installation. Be sure to save all stock

components for possible use later.

Installation Instructions

1. Install TBR fender eliminator kit using the original bolts

and supplied nuts, the nuts will be inside the bike under

seat.

2. Attach turn signals and plate light bolts using the wire

splice connectors supplied to the correct wires in the

harness as shown in the Wiring Diagram.

3. Re-install seats and covers.

4. Double check all your work.

5. Before you run the bike, clean off all ﬁngerprints and

dirt, as any oily residue will etch the metal and become

somewhat permanent when the system gets hot. Also,

remove any plastic ﬁlm from the name badge(s) and or

canister clamp(s). Run the bike and enjoy. It is normal

for some white smoke to appear the ﬁrst time you start

the bike. This is packing/manufacturing oil from inside

the pipe burning off. Check for gaps or leaks. If you ﬁnd a

leak, a little high temperature silicon sealant should ﬁx it.

After 50 to 100 miles, recheck all fasteners for tightness.

Qty. Description Part Number

1 Fender Bracket 005-19904B

2 Lighted License Plate Bolt 005-8504LTZ

1 Turn Signals (set of 2) 005-88T2

6 Butt Splice Connectors 005-BS1614

1 Zip Tie 005-ZT458B

1 Zip Tie Tab 005-ZTM4

4 6mm Flange Nut 005-FN6

1 TBR Sticker Kit 015-10212

V.A.L.E.

V A R I A B L E A X I S L O C K I N G E X H A U S T

2009 Kawasaki

ZX-6R

Fe nde r E lim ina tor Ki t

Part # 013 - 24 1

Parts List

WIRING DIAGRAM

Left Turn Signal

(Grey connector)

Red

Plate Lights

Right Turn Signal

(Black connector)

Wiring Harness

Black/Yellow

Red

Black

Red

Warranty

Two Brothers Racing products are intended for closed course competition purposes only, and therefore are sold “as is”

without warranty. Two Brothers Racing specifically disclaims any warranties of merchantability or fitness for a particular

purpose and disclaims all responsibility for consequential and incidental damages or any other losses arising from the

use of these products or parts.

V.A.L.E 1

Inhaltsverzeichnis

Seite 1 - V.A.L.E

IMPORTANT - PLEASE READ CAREFULLYWe recommend that this performance part be installed by a qualied motorcycle technician. If you have a

Kommentare zu diesen Handbüchern

Keine Kommentare

Two-brothers-racing Kawasaki ZX-6R FE Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Two-brothers-racing Kawasaki ZX-6R FE herunter. Two Brothers Racing Kawasaki ZX-6R FE User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Two-brothers-racing Kawasaki ZX-6R FE