2005-06 Suzuki
BANDIT 1200
Slip-On Exhaust System with M-2 / M-5 Canister
Part #005-1450406V / 005-1450407V / 005-1450408V / 005-1450419V / 005-1450420V
V.A.L.E.
VARIABLE AXIS LOCKING EXHAUST
TM
Parts List
IMPORTANT - PLEASE READ CAREFULLY
Warranty
Two Brothers Racing products are intended for closed course competition purposes only, and therefore are sold “as is”
without warranty. Two Brothers Racing specifically disclaims any warranties of merchantability or fitness for a particular
purpose and disclaims all responsibility for consequential and incidental damages or any other losses arising from the use
of these products or parts.
We recommend that this performance part be installed by a qualied
motorcycle technician. If you have any doubts as to your ability to install this
performance part, please consult with your local motorcycle dealer. Read all
instructions rst before starting installation. Make sure the motorcycle and
exhaust system are completely cool before starting the installation. Also,
make sure the bike is secure on a centerstand or ideally a service lift during
installation. Be sure to save all stock components for possible use later.
Installation Instructions
1. Make sure the bike is completely cool before starting the
installation. Make sure the bike is secure on a centerstand
or ideally a service lift.
2. Remove the stock mufer assembly by loosening the
muferclampandthe2mountingbolts(1boltatmufer
top and 1 bolt on stock lower S-Bend).
3. Attach V.A.L.E. Assembly.
Usethe4(four)6x14mmsocketheadcapscrewsand
splitlockwasherstolooselyattachthemufercanister
to the V.A.L.E. tube assembly.
4. Slidethemuferassemblyintothestockmufergasket
andclamp.Donottightenthisclampuntilnalstep.
5. Slip the supplied rubber lined mufer clamp onto the
mufer canisterand loosely attachto the uppermount
behind the rear passenger peg using the stock hardware.
6. Withthenewexhaustassemblyinplace,securelytighten
the4V.A.L.E.socketheadcapscrews,securingtheX-Lite
retaining ring andexhaust tube to the mufer canister,
keepingsurethatthemuferisincorrectalignmentwith
the bike.
7. Securelytightenthemufercanisterclamp.
8. Securelytightenthemuferjointclamptothestockcollector.
9. Install OEM rubber bumper to center stand bracket by
twisting and pushing.
Qty. Description Part Number
1 Bandit1200MuferCanisterM-2orM-5 Varies
1 RubberLinedMuferBodyClamp Varies
1 V.A.L.E.ExhaustTubeAssembly 005-14501S
1 HARDWAREKIT 005-145-3
1 X-RingKit 005-7-2-3KIT
1 5mmLongHandleBallendhexkey 005-9-18610
4 Split Lock Washer 005-WL6
4 6x14mmSocketHeadCapScrew 005-SH614
1 Sticker Kit 015-10212
Kommentare zu diesen Handbüchern