Two-brothers-racing S2 Pro Bedienungsanleitung PDF herunterladen

Installation Instructions

1. Remove and identify all parts from packaging.

2. Locate the “T” on the hoop insert to determine the top.

3. Stand the left and right sides up.

4. Insert stand hoop into center of side supports with “T”

facing up.

5. Use supplied 8x25mm socket head at bolts and

tighten to 15 ft-lbs.

*Do not force bolts, if you need to, loosen pre-installed

bolts to align threaded backing plate correctly. Loosely

install all bolts before nal tightening.

6. After lifting the stand a couple of times re-tighten

all screws.

TBR

S2Pro Rear-Stand

Part # 007-002-K

Parts List

Qty. Description

1 Left Side Stand Assembly

1 Right Side Stand Assembly

1 Stainless Steel Hoop

1 HARDWARE KIT

4 8x25mm Socket Head Flat Bolt

1 5mm Long Handle Ball End Hex Key

Installation Instructions1. Remove and identify all parts from packaging.2. Locate the “T” on the hoop insert to determine the top.3. Stand the lef

Keine Kommentare

Two-brothers-racing S2 Pro Bedienungsanleitung